How to scientifically use fiber laser cutting machine

 (letto 391 volte)
Benvenuto, ospite,
puoi consultare il forum ma non puoi scrivere.
Per intervenire nel forum effettua il login oppure registrati.
Rispondi   Aggiungi sondaggio
Vai ai messaggi non letti
Inviato il 03 Agosto 2018, 04:54:49


Messaggi: 867

The cutting quality of the fiber laser cutting machine is the customer's concern, and it is also a skill training that the craftsman needs to keep improving. However, if you want to cut the satisfactory sample, you must use the fiber laser cutting machine scientifically. We look at the evaluation criteria for cutting quality and the method to achieve high quality cutting from the following three points:
750W Dual Drive Metal Sheet and Tube Laser Cutting Machine
 First, the cut section is smooth, with few lines and no brittle fracture. When the fiber laser cutting machine cuts, the marks of the cutting will be displayed after the laser beam is deflected, so the speed is slightly lowered at the end of the cutting process, and the formation of the lines can be eliminated.
Second, the size of the slit width. This factor is related to the thickness of the cutting plate and the size of the nozzle. Under normal circumstances, the cutting thin plate has a narrow slit, and the selected nozzle is small because the amount of air jet required is relatively small. Similarly, the thick plate requires a large amount of air jet, so The nozzle is also large and the slit is widened accordingly. So look for the right type of nozzle to cut a good product.
500W Single Drive Metal Laser Cutting Machine
Third, the cutting verticality is good, and the heat affected area is small. The perpendicularity of the cutting edge is important. When away from the focus, the laser beam will diverge. Depending on the position of the focus, the cutting becomes wider toward the top or bottom, and the more vertical the edge, the higher the cutting quality.

Rispondi   Aggiungi sondaggio
Vai a:

© 2006-2020 Trilud S.p.A. - P.I: 13059540156 - Tecnozoom, supplemento alla testata giornalistica NanoPress registrata al Tribunale di Milano n. 314/08